• Hydrophobic
• Oleophobic
• Wash resistant (varies between 10-50 washes)
• No change in look and feel
• Breathable
• Air- and steam-permeable
• Physiologically harmless
• Temperature resistance up to 450°C (peak temperature)
• Ready-to-use
• Suitable for industrial dipping and spray applications
• Long-lasting effect
• Designed to be used on variety of textiles surfaces - e.g. synthetic, wool, silk, cotton, linen, technical textiles and home textiles.

• Composition: SiO2 solved in water incl. cross linking agent (please see the corresponding material safety data sheet)
• Hydrophobic (Water Droplet Test AATCC 193, Spray Test AATCC 22 & DIN EN 24920 (08.92) Spray Test)
• Oleophobic (according AATCC 118)
• PFC-Free (according UNI CEN/TS 15968.2010)
• Abrasion Resistance (according DIN EN ISO 12 947-2:1999-04 - 5000 cycles)
• Longevity (Artificial weathering with Xenon arc lamps according DIN EN ISO 4892- 1:2006 - 550h (five weathering years)
• REACH Conformity
• ZDHC MRSL V2.0 Conformity

Vetro Power Fibre Protect Coating with Cross Linking Agent is a ready-to-use spray solution specifically designed for use in the textile industry. This coating provides water and oil-repellent protection for various types of textiles, including synthetic, wool, silk, cotton, linen, technical textiles, home textiles & more.

Application:

• Vetro Power Fibre Protect Coating with Cross Linking Agent is ready-to-use and should not be diluted. Shake the product well before application.
• Industrial Dipping Application: The product can be applied using an industrial dipping process with a padding (foulard) machine.
• Industrial Spray Application: Industrial spray devices are suitable for applying the product. For a long-lasting effect, ensure that surfaces are free of dust, grease, and any residues from cleaning agents.
• For all surfaces, it is recommended to test for stability and functionality in an inconspicuous area.

Drying and Hardening:

• Apply the product formulation onto the surface.
• Allow the surface to dry completely.
• Fixation of dried surface for 90 seconds at a temperature of 160 degrees. This step is absolutely necessary.

Consumption:

Consumption varies depending on the surface's absorbency, ranging from 20 to 50 ml/m².