Vetro Power CRISTAL Glass Polish Powder

Optical-grade Cerium Oxide, purity verified to 99.95%. Removes fine scratches, water spots, and surface haze from automotive and architectural glass, mirrors, and hard surfaces.

Benefits

Removes fine scratches, sanding marks, water spots, limescale and mineral deposits for crystal-clear glass
Formulated with optical-grade Cerium Oxide, purity verified to 99.95%
Non-toxic, zinc-free formula with no fumes, safe for all workspaces
Works on automotive glass, architectural glass, mirrors, shower enclosures, watches, phones and gemstones
Batch COA available on request

Performance & Testing

Vetro Power CRISTAL works through a chemical-mechanical action - Cerium Oxide reacts with the silica in glass at a microscopic level, gently removing the damaged surface layer and restoring optical clarity. At 99.95% pure CeO₂, it delivers consistent, repeatable results batch to batch.
What It Removes - Fine scratches, Wiper blade marks, Water spots & limescale, Surface haze & oxidation, Light acid rain etching, Mineral deposits, Sanding marks

Specifications

pH-value (undiluted)	Not available
Density (g/ml)	7.132 g/cm3 at 25 °C
Flash Point (°C)	Not applicable
Boiling Point (°C)	3500°C
Colour	Yellow/Pinkish to tan powder
Manufacturing Standard	AR Grade
HS Code	2846.1090
CAS No.	1306-38-3
Shelf Life	60 months

Vetro Power CRISTAL is a professional glass polish powder formulated with optical-grade Cerium Oxide, purity verified to 99.95%. Restores optical clarity to glass by removing fine scratches, sanding marks, water spots, limescale and mineral deposits, leaving a crystal-clear, haze-free finish. Non-toxic, zinc-free formula with no fumes. Safe for all workspaces.

Restore. Renew. Reveal.

Works On Automotive glass, headlights & windscreens · Architectural & building glass · Mirrors & shower enclosures · Glass windows, doors & tables · Phones, watches & gemstones · Marble, ceramics & metal surfaces · Kitchen hobs & oven doors

How to Use

Clean and dry the surface thoroughly.
Mix Cristal with water to form a smooth slurry.
Apply to a damp felt or foam polishing pad.
Polish at 1,500–2,500 RPM using a DA or rotary machine, or apply by hand with firm circular pressure.
Keep the surface moist throughout. Do not allow the powder to dry on glass.
Wipe clean with a damp cloth. Inspect. Repeat if required.

For surface scratches only. Scratches felt with a fingernail may require professional glass repair, not polishing. Not for use on coated, tinted or treated glass without prior patch testing.

Coverage Guide 1 kg: approximately 7–10 full windshield restorations or 8–12 large architectural glass panels. 5 kg: approximately 33–50 windshield restorations or 40–62 large glass panels.